GE VMIVME-4150 12位模拟输出板

GE VMIVME-4150是一个12位模拟输出板，由美国通用电气（GE）制造。以下是关于VMIVME-4150的详细介绍：

1. 特性：

• 提供12个隔离的高质量12位模拟输出通道，每个通道与所有其他通道和VME电气隔离。
• 双极性电压输出范围可选择为2.5V、5V或10V，单极性电压输出范围可选择为0至2.5V、0至5V或0至10V。
• 在整个10V范围内，电压输出的负载能力为10mA。
• 提供4至20mA、0至20mA或5至25mA的电流输出。
• 环路输出电压输出精度为0.05%，电流环路输出精度为0.08%。
• 4、8或12通道配置，光学数据耦合提供完全的电流隔离。
• 静态回读数据寄存器简化程序控制。
• 现场连接的前面板入口，电压输出的程控连接/断开操作有助于系统试验。

2. 应用场景：

• VMIVME-4150是电子电路设计中必不可少的工具，可以用于电路的仿真测试、验证、故障排查以及优化。
• 这款模拟输出板特别适用于需要高精度模拟输出的应用场景，如工业自动化、测试设备、科研实验室等。

3. 替代产品：

• MVME4150是VMIVME-4150的直接替代产品，由Merlin Embedded制造。它提供多达16个光隔离模拟输出通道，分辨率提高到16位，每个通道都有独立于其他通道的电源和地平面。

请注意，以上信息可能因产品升级或更改而有所变化。如有需要，建议查阅GE或Merlin Embedded的官方文档或联系技术支持以获取最准确的信息。

GE VMIVME-4150 is a 12 bit analog output board manufactured by General Electric (GE) in the United States. The following is a detailed introduction about VMIVME-4150:

Features:
Provide 12 isolated high-quality 12 bit analog output channels, each channel electrically isolated from all other channels and VME.
The bipolar voltage output range can be selected as 2.5V, 5V, or 10V, while the unipolar voltage output range can be selected as 0 to 2.5V, 0 to 5V, or 0 to 10V.
The load capacity of the voltage output is 10mA throughout the entire 10V range.
Provide current output of 4 to 20mA, 0 to 20mA, or 5 to 25mA.
The output voltage accuracy of the loop is 0.05%, and the output accuracy of the current loop is 0.08%.
4. 8 or 12 channel configuration, optical data coupling provides complete current isolation.
Static read back data registers simplify program control.
The on-site connection of the front panel inlet and the programmable connection/disconnection operation of voltage output are helpful for system testing.
Application scenario:
VMIVME-4150 is an essential tool in electronic circuit design, which can be used for circuit simulation testing, verification, fault diagnosis, and optimization.
This analog output board is particularly suitable for application scenarios that require high-precision analog output, such as industrial automation, testing equipment, research laboratories, etc.
Alternative products:
MVME4150 is a direct replacement product for VMIVME-4150, manufactured by Merlin Embedded. It provides up to 16 optical isolated analog output channels, with a resolution increased to 16 bits, and each channel has an independent power and ground plane from the other channels.
Please note that the above information may vary due to product upgrades or changes. If necessary, it is recommended to consult the official documentation of GE or Merlin Embedded or contact technical support for the most accurate information.