KUC711AE01 3BHB004661R0001 ABB 励磁控制器单元

KUC711AE01 3BHB004661R0001是一款由ABB公司生产的励磁控制器单元，具体为KUC711AE型号的励磁机控制模块。这款控制器适用于发电、船舶、石油和天然气、牵引、港口起重机和矿用卡车等领域的解决方案。

以下是关于KUC711AE01 3BHB004661R0001的一些主要特点和规格：

1. 电流范围：适用于20至12,000 A的电流范围。
2. 继电器：具有触点开关输出，触点容量220VAC/2A或24VDC/2A。
3. SSR驱动：驱动电压为12VDC/30mA，用于驱动SSR固态继电器。
4. 通讯变送输出：支持4~20mA、1~5V、Rs485通讯等，精度为±0.2%F.S±1个字，并自动对温漂、时漂进行补偿。
5. 电流输出负载能力：0~600Ω或0~250Ω。
6. 测量控制周期：0.5s。
7. 配电输出：DC24±1V（25mA）。
8. 隔离器隔离电压：输入-输出为1500V，输入-电源、输出-电源为1000V。
9. 工作环境：温度0~50℃，相对湿度≤80%RH。
10. 电源：开关电源100～240VAC（50HZ/60HZ），24VDC/AC±2V。
11. 功耗：≤ 2W。
12. 外观颜色：绿色。
13. 安装尺寸：100×112×45（22.5）mm，安装方式通常为DIN35导轨。

此外，KUC711AE01 3BHB004661R0001也适用于励磁系统高压变频器，用于接收来自传感器和输入信号，根据控制算法输出控制信号，从而控制励磁系统的运行。

以上信息仅供参考，如有需要，建议直接联系ABB公司或相关经销商获取更详细的产品信息和技术支持。

KUC711AE01 3BHB004661R0001 is an excitation controller unit produced by ABB, specifically for the KUC711AE excitation control module model. This controller is suitable for solutions in fields such as power generation, ships, oil and gas, traction, port cranes, and mining trucks.

The following are some main features and specifications of KUC711AE01 3BHB004661R0001:

Current range: Suitable for a current range of 20 to 12000 A.
Relay: With contact switch output and contact capacity of 220VAC/2A or 24VDC/2A.
SSR drive: The driving voltage is 12VDC/30mA, used to drive SSR solid-state relays.
Communication transmission output: Supports 4-20mA, 1-5V, Rs485 communication, etc., with an accuracy of ± 0.2% F.S ± 1 word, and automatically compensates for temperature drift and time drift.
Current output load capacity: 0-600 Ω or 0-250 Ω.
Measurement control cycle: 0.5s.
Power distribution output: DC24 ± 1V (25mA).
Isolator isolation voltage: Input output is 1500V, and input power and output power are 1000V.
Working environment: Temperature 0-50 ℃, relative humidity ≤ 80% RH.
Power supply: Switching power supply 100-240VAC (50Hz/60Hz), 24VDC/AC ± 2V.
Power consumption: ≤ 2W.
Appearance color: green.
Installation size: 100 × 112 × 45 (22.5) mm, usually installed with DIN35 guide rail.
In addition, KUC711AE01 3BHB004661R0001 is also suitable for high-voltage frequency converters in excitation systems, which are used to receive signals from sensors and inputs, and output control signals based on control algorithms to control the operation of the excitation system.

The above information is for reference only. If necessary, it is recommended to directly contact ABB or relevant distributors for more detailed product information and technical support.