Fireye 45UV5-1101 紫外线火焰探测器

45UV5-1101是一款紫外线火焰探测器，它采用了紫外线技术来检测火焰中的紫外线辐射。以下是关于该产品的详细介绍：

1. 安装选项：45UV5-1101提供了1“内螺纹安装选项，兼容美国NPT或英国惠特沃斯标准。其外壳采用压铸铝材质，设计有铰接式安装法兰和永久安装空气配件，带有两个1/4 – 20螺钉，可松开以便快速拆卸，方便进行清洁和维护工作，如镜头清洁。
2. 温度适应性：这款火焰探测器在温度方面有一定的适应性。其最大工作温度为200°F（93°C），最低运行温度为-40°F（-40°C）。这使得它能够在较宽的温度范围内正常工作，适用于不同的环境和应用场合。
3. 电源要求：45UV5-1101需要来自相关Fireye控制器的4 VA AC电源。具体功率要求可能因应用场合和控制器的不同而有所变化。
4. 应用场景：45UV5-1101紫外线火焰探测器特别适用于检测化石燃料火焰的紫外线辐射，如天然气、焦炉煤气、丙烷、甲烷、丁烷、煤油、轻石油馏分和柴油燃料等。它仅用于Flame-Monitor™、BurnerLogix™、D系列、FlameWorx、MicroM和一些P系列Fireye控制型号，为有监督的手动、半自动和全自动单燃烧器提供火焰保护和监控系统，如锅炉、加工烤箱和加热器等。

此外，该产品还具有一些其他特点，如支持存储转发机制、提供便捷的以太网通讯解决方案等。不过，请注意，以上信息可能因产品版本和配置的不同而有所差异。如需更多信息，建议直接咨询产品供应商或制造商。

45UV5-1101 is a UV flame detector that uses UV technology to detect UV radiation in flames. The following is a detailed introduction about the product:

Installation Options: 45UV5-1101 offers a 1 “female thread installation option, compatible with American NPT or British Whitworth standards. Its casing is made of die cast aluminum material, designed with hinged mounting flanges and permanent air fittings, and comes with two 1/4-20 screws that can be loosened for quick disassembly, making it easy to clean and maintain, such as lens cleaning.
Temperature adaptability: This flame detector has a certain degree of adaptability in terms of temperature. Its maximum operating temperature is 200 ° F (93 ° C), and its minimum operating temperature is -40 ° F (-40 ° C). This enables it to operate normally over a wide temperature range, suitable for different environments and applications.
Power requirement: 45UV5-1101 requires a 4 VA AC power supply from the relevant Fireye controller. The specific power requirements may vary depending on the application and controller.
Application scenario: The 45UV5-1101 ultraviolet flame detector is particularly suitable for detecting the ultraviolet radiation of fossil fuel flames, such as natural gas, coke oven gas, propane, methane, butane, kerosene, light petroleum fractions, and diesel fuels. It is only used for Flame Monitor ™、 BurnerLogix ™、 D-series, FlameWorx, MicroM, and some P-series Fireye control models provide flame protection and monitoring systems for supervised manual, semi-automatic, and fully automatic single burners, such as boilers, processing ovens, and heaters.
In addition, the product also has some other features, such as supporting storage and forwarding mechanisms, providing convenient Ethernet communication solutions, etc. However, please note that the above information may vary depending on the product version and configuration. If you need more information, it is recommended to consult the product supplier or manufacturer directly.