60M100-00
Bently Nevada 60M100-00 的规格如下：
| 类别 | 规格参数 |
|---|---|
| 尺寸 | 135 x 55 x 22 mm（5.31 x 2.17 x 0.87 英寸） |
| 重量 | 0.2 kg（0.45 磅） |
| 电源电压 | 24 VDC |
| 通信 | – 无线：IEEE 802.15.4 协议 – 以太网：可选以太网接口 |
| 工作温度 | -40 至 70 °C（-40 至 158 °F） |
| 存储温度 | -40 至 85 °C（-40 至 185 °F） |
| 湿度 | 5% 至 95% 非凝结 |
| 主要组件 | 60M100 监测器、Adapt.wind 软件、传感器和电缆 |
| 电气参数 | – 输入功率：最小 18 VDC，最大 36 VDC – 电流：最大 1.7 A – 浪涌电流：最大 2.7 A（小于 5 ms） |
| 性能参数 | – 输入动态范围：110 dB @ fs = 102.4 ksps – 信噪比：110 dB @ fs = 102.4 ksps – A/D 转换：Σ-Δ 24 位标称 – 带宽：0 至 40 kHz – 分辨率：高分辨率，可实现精确的数据测量和分析 – 精度：高精度，确保数据的可靠性 |
| 功能特点 | – 高速、多通道数据采集，支持多个独立信号通道的监测 – 实时信号处理和分析功能，提供丰富的信号处理算法和工具 – 灵活的触发和同步功能，可根据用户需求进行配置 – 支持多种接口和通信协议，如 PCI、Ethernet 等，方便与其他设备和系统进行连接和通信 – 支持多达 12 个动态通道输入 – LED 指示灯（电源 LED、OK LED、危险 LED、警报 LED） |
| 应用领域 | 适用于各种工业应用，包括旋转设备监测、过程监测、预测性维护等，特别适用于风力涡轮发电机组的监测和诊断 |
产品概述：
Bently Nevada 60M100-00 是一款强大的无线数据采集器，设计用于恶劣的工业环境。它能够采集高精度的数据，并通过无线或以太网接口传输至本特利的监测系统进行分析。该产品具有坚固耐用的设计，可承受恶劣的工作环境，并提供了丰富的信号处理算法和工具，以满足各种工业监测需求。
应用场景：
- 旋转设备监测：用于监测旋转设备的振动、温度和其他参数，以防止故障。
- 过程监测：用于监测过程变量，以确保产品质量和安全性。
- 预测性维护：用于收集数据以预测设备故障，并制定维护计划。
注意事项：
- 安装与配置：60M100-00 采用模块化设计，用户可以根据实际需求灵活配置输入/输出模块、通信模块等。安装和配置过程应遵循本特利提供的指导手册或在线资源。
- 环境要求：虽然该设备具有较宽的工作温度和湿度范围，但在极端环境下使用时仍需注意防护，以确保设备的长期稳定运行。
- 定期维护：为确保设备的长期稳定运行，建议定期进行维护和检查，并根据需要进行维修或更换故障部件。
The specifications of Bently Nevada 60M100-00 are as follows:
Category specification parameters
Size 135 x 55 x 22 mm (5.31 x 2.17 x 0.87 inches)
Weight 0.2 kg (0.45 pounds)
Power supply voltage 24 VDC
Communication Wireless: IEEE 802.15.4 protocol
-Ethernet: Optional Ethernet interface
Working temperature -40 to 70 ° C (-40 to 158 ° F)
Storage temperature -40 to 85 ° C (-40 to 185 ° F)
Humidity 5% to 95% non condensing
Main components: 60M100 monitor, Adaptewind software, sensors, and cables
Electrical parameters – Input power: minimum 18 VDC, maximum 36 VDC
-Current: Maximum 1.7 A
-Surge current: maximum 2.7 A (less than 5 ms)
Performance Parameters – Input Dynamic Range: 110 dB @ fs=102.4 ksps
-Signal to noise ratio: 110 dB @ fs=102.4 ksps
-A/D conversion: ∑ – Δ 24 bit nominal
-Bandwidth: 0 to 40 kHz
-Resolution: High resolution, capable of precise data measurement and analysis
-Accuracy: High precision, ensuring the reliability of data
Functional Features – High speed, multi-channel data acquisition, supporting monitoring of multiple independent signal channels
-Real time signal processing and analysis capabilities, providing rich signal processing algorithms and tools
-Flexible triggering and synchronization functions, configurable according to user needs
-Supports multiple interfaces and communication protocols, such as PCI, Ethernet, etc., for easy connection and communication with other devices and systems
-Supports up to 12 dynamic channel inputs
-LED indicator lights (power LED, OK LED, hazard LED, alarm LED)
Applicable to various industrial applications, including rotating equipment monitoring, process monitoring, predictive maintenance, etc., especially suitable for monitoring and diagnosis of wind turbine generators
Product Overview:
Bently Nevada 60M100-00 is a powerful wireless data collector designed for harsh industrial environments. It can collect high-precision data and transmit it to Bentley’s monitoring system for analysis through wireless or Ethernet interfaces. This product has a sturdy and durable design, can withstand harsh working environments, and provides rich signal processing algorithms and tools to meet various industrial monitoring needs.
Application scenarios:
Rotating equipment monitoring: used to monitor the vibration, temperature, and other parameters of rotating equipment to prevent malfunctions.
Process monitoring: used to monitor process variables to ensure product quality and safety.
Predictive maintenance: used to collect data to predict equipment failures and develop maintenance plans.
matters needing attention:
Installation and configuration: The 60M100-00 adopts a modular design, allowing users to flexibly configure input/output modules, communication modules, etc. according to their actual needs. The installation and configuration process should follow the guidance manual or online resources provided by Bentley.
Environmental requirements: Although the equipment has a wide range of operating temperatures and humidity, protection should still be taken into account when used in extreme environments to ensure long-term stable operation of the equipment.
Regular maintenance: To ensure the long-term stable operation of the equipment, it is recommended to conduct regular maintenance and inspection, and repair or replace faulty components as needed.
